Transition mechanisms of translational motions of bubbles in an ultrasonic field

The translation behaviors of oscillating bubbles are closely related to the polymerizations and dispersions between them, which are crucial for the ultrasonic cavitation effect. In this study, six types of translational motion of bubbles with a wide range of sizes (2–100 μm) in the R₀₁-R₀₂ plane are investigated. Our results demonstrate that in addition (to the 2nd order harmonic), the 1/2 order subharmonic can change the bubble pairs from the three states of the attraction, stable after attraction, and repulsion to that of the repulsion, coalescence, and attraction, respectively. Furthermore, within the range of the main resonance radius and the 1/2 order subharmonic resonance radius, the chaotic bubble pairs with alternating attractive and repulsive forces appear in the region between the coalescence pairs and stable pairs after attraction. Finally, the corresponding physical mechanisms of the chaotic translational motions are also revealed.     

Effect of ultrasonic power on the stability of low-molecular-weight oyster peptides functional-nutrition W1/O/W2 double emulsion

Ultrasonic-assisted treatment is an eco-friendly and cost-effective emulsification method, and the acoustic cavitation effect produced by ultrasonic equipment is conducive to the formation of stable emulsion. However, its effect on the underlying stability of low-molecular-weight oyster peptides (LOPs) functional-nutrition W₁/O/W₂ double emulsion has not been reported. The effects of different ultrasonic power (50, 75, 100, 125, and 150 W) on the stability of double emulsions and the ability to mask the fishy odor of LOPs were investigated. Low ultrasonic power (50 W and 75 W) treatment failed to form a well-stabilized double emulsion, and excessive ultrasound treatment (150 W) destroyed its structure. At an ultrasonic power of 125 W, smaller particle-sized double emulsion was formed with more uniform distribution, more whiteness, and a lower viscosity coefficient. Meanwhile, the cavitation effect generated by 125 W ultrasonic power improved storage, and oxidative stabilities, emulsifying properties of double emulsion by reducing the droplet size and improved sensorial acceptability by masking the undesirable flavor of LOPs. The structure of the double emulsion was further confirmed by optical microscopy and confocal laser scanning microscopy. The ultrasonic-assisted treatment is of potential value for the industrial application of double emulsion in functional-nutrition foods.     

Cavitation-induced shock wave behaviour in different liquids

This paper follows our earlier work where a strong high frequency pressure peak has been observed as a consequence of the formation of shock waves due to the collapse of cavitation bubbles in water, excited by an ultrasonic source at 24 kHz. We study here the effects of liquid physical properties on the shock wave characteristics by replacing water as the medium successively with ethanol, glycerol and finally a 1:1 ethanol–water solution. The pressure frequency spectra obtained in our experiments (from more than 1.5 million cavitation collapsing events) show that the expected prominent shockwave pressure peak was barely detected for ethanol and glycerol, particularly at low input powers, but was consistently observed for the 1:1 ethanol–water solution as well as in water, with a slight shift in peak frequency for the solution. We also report two distinct features of shock waves in raising the frequency peak at MHz (inherent) and contributing to the raising of sub-harmonics (periodic). Empirically constructed acoustic pressure maps revealed significantly higher overall pressure amplitudes for the ethanol–water solution than for other liquids. Furthermore, a qualitative analysis revealed that mist-like patterns are developed in ethanol–water solution leading to higher pressures.     

Adsorption of Cr(Ⅵ) polluted water by Fe3O4@SiO2-APTMS nanocomposites prepared in the presence of ultrasonic irradiation for sustainable water resources utilization

The research on developing a purification technology for Cr(Ⅵ) polluted water with high efficiency and the low energy consumption is crucial for achieving several Sustainable Development Goals (SDGs). In order to achieve these goals, Fe₃O₄@SiO₂-APTMS nanocomposites were prepared by Fe₃O₄ nanoparticles modified with silica and 3-aminopropyltrimethoxysilane in the presence of ultrasonic irradiation. The nanocomposites were characterized by TEM, FT-IR, VSM, TGA, BET, XRD, XPS and these analytic results proved that the nanocomposites were successfully prepared. The influential factors of Fe₃O₄@SiO₂-APTMS on Cr(Ⅵ) adsorption have been explored and better experimental conditions have been obtained. The adsorption isotherm conformed to the Freundlich model. Pseudo-second-order kinetic model provided a better correlation for the experimental data compared to other kinetic models. Thermodynamic parameters for adsorption indicated that the adsorption of Cr(Ⅵ) was a spontaneous process. It was speculated that the adsorption mechanism of this adsorbent includes redox, electrostatic adsorption and physical adsorption. In summary, the Fe₃O₄@SiO₂-APTMS nanocomposites were of great significance to human health and the remediation of heavy ion pollution, contributing to achievement of the Sustainable Development Goals (SDGs), including SDG-3, SDG-6.     

Investigations into wetting and spreading behaviors of impacting metal droplet under ultrasonic vibration control

Ultrasonic-assisted metal droplet deposition (UAMDD) is currently considered a promising technology in droplet-based 3D printing due to its capability to change the wetting and spreading behaviors at the droplet-substrate interface. However, the involved contact dynamics during impacting droplet deposition, particularly the complex physical interaction and metallurgical reaction of induced wetting-spreading-solidification by the external energy, remain unclear to date, which hinders the quantitative prediction and regulation of the microstructures and bonding property of the UAMDD bumps. Here, the wettability of the impacting metal droplet ejected by a piezoelectric micro-jet device (PMJD) on non-wetting and wetting ultrasonic vibration substrates is studied, and the corresponding spreading diameter, contact angle, and bonding strength are also discussed. For the non-wetting substrate, the wettability of the droplet can be significantly increased due to the extrusion of the vibration substrate and the momentum transfer layer at the droplet-substrate interface. And the wettability of the droplet on a wetting substrate is increased at a lower vibration amplitude, which is driven by the momentum transfer layer and the capillary waves at the liquid–vapor interface. Moreover, the effects of the ultrasonic amplitude on the droplet spreading are studied under the resonant frequency of 18.2–18.4 kHz. Compared to deposit droplets on a static substrate, such UAMDD has 31% and 2.1% increments in the spreading diameters for the non-wetting and wetting systems, and the corresponding adhesion tangential forces are increased by 3.85 and 5.59 times.     

Dual effects of ultrasound on fabrication of anodic aluminum oxide

Ultrasound has been proven to enhance the mass transfer process and impact the fabrication of anodic aluminum oxide (AAO). However, the different effects of ultrasound propagating in different media make the specific target and process of ultrasound in AAO remain unclear, and the effects of ultrasound on AAO reported in previous studies are contradictory. These uncertainties have greatly limited the application of ultrasonic-assisted anodization (UAA) in practice. In this study, the bubble desorption and mass transfer enhancement effects were decoupled based on an anodizing system with focused ultrasound, such that the dual effects of ultrasound on different targets were distinguished. The results showed that ultrasound has the dual effects on AAO fabrication. Specifically, ultrasound focused on the anode has a nanopore-expansion effect on AAO, leading to a 12.24 % improvement in fabrication efficiency. This was attributed to the promotion of interfacial ion migration through ultrasonic-induced high-frequency vibrational bubble desorption. However, AAO nanopores were observed to shrink when ultrasound was focused on the electrolyte, accompanied by a 25.85 % reduction in fabrication efficiency. The effects of ultrasound on mass transfer through jet cavitation appeared to be the reason for this phenomenon. This study resolved the paradoxical phenomena of UAA in previous studies and is expected to guide AAO application in electrochemistry and surface treatments.     

Ultrasonically prepared photocatalyst of W/WO3 nanoplates with WS2 nanosheets as 2D material for improving photoelectrochemical water splitting

A sonochemical treatment has been an emerged technique as an interesting method for fabricating different photocatalysts with unique photoelectrochemical (PEC) properties. This study investigated the PEC performance of WO₃ with WS₂ nanosheets as a 2D material before calcination (WO₃/WS₂-90) and after calcination (WO₃/WS₂-450) prepared with sonochemical treatment. The WS₂ nanosheets were prepared from a liquid exfoliation phase with few-layer nanosheets, approximately 6.5 nm in thickness. The nanosheets were confirmed by UV–Vis spectroscopy and atomic force microscopy. Further, XPS, RAMAN, and SEM-EDAX analyses indicated that, following calcination of the WO₃/WS₂ electrode, the WS₂ nanosheets initially transformed to 2D-WO₃. After depositing the WS₂ nanosheets on the WO₃, the photocurrent density increased substantially. The WO₃/WS₂-450 films after calcination showed a photocurrent density of 5.6 mA.cm⁻² at 1.23 V vs. Ag/AgCl, which was 3.1 and 7.2 times higher, respectively than those of the WO₃/WS₂-90 before calcination and pure WO₃. Mott-Schottky and electrochemical impedance spectroscopy analyses confirmed the fabrication of the WO₃/WS₂ photoanode after calcination. The deposition of WS₂ nanosheets onto pure WO₃ increased the donor concentration (24-fold), reduced the space charge layer (4.6-fold), and decreased the flat band potential (1.6-fold), which could all help improve the photoelectrochemical efficiency. Moreover, the incorporation of WO₃ with WS₂ nanosheets as a 2D material (WO₃/WS₂-450) enhanced the incident photon current efficiency (IPCE) by 55%. In addition, the applied-bias photon-to-current conversion efficiency of the WO₃/WS₂-450 films was approximately 2.26% at 0.75 V (vs. Ag/AgCl), which is 5.6 and 9 times higher, respectively than those of WO₃/WS₂-90 and pure WO₃.     

Enhanced photocatalytic degradation of organic dyes by ultrasonic-assisted electrospray TiO2/graphene oxide on polyacrylonitrile/β-cyclodextrin nanofibrous membranes

Polyacrylonitrile (PAN)/β-cyclodextrin (β-CD) composite nanofibrous membranes immobilized with nano-titanium dioxide (TiO₂) and graphene oxide (GO) were prepared by electrospinning and ultrasonic-assisted electrospinning. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) confirmed that TiO₂ and GO were more evenly dispersed on the surface and inside of the nanofibers after 45 min of ultrasonic treatment. Adding TiO₂ and GO reduced the fiber diameter; the minimum fiber diameter was 84.66 ± 40.58 nm when the mass ratio of TiO₂-to-GO was 8:2 (PAN/β-CD nanofibrous membranes was 191.10 ± 45.66 nm). Using the anionic dye methyl orange (MO) and the cationic dye methylene blue (MB) as pollutant models, the photocatalytic activity of the nanofibrous membrane under natural sunlight was evaluated. It was found that PAN/β-CD/TiO₂/GO composite nanofibrous membrane with an 8:2 mass ratio of TiO₂-to-GO exhibited the best degradation efficiency for the dyes. The degradation efficiency for MB and MO were 93.52 ± 1.83% and 90.92 ± 1.52%, respectively. Meanwhile, the PAN/β-CD/TiO₂/GO composite nanofibrous membrane also displayed good antibacterial properties and the degradation efficiency for MB and MO remained above 80% after 3 cycles. In general, the PAN/β-CD/TiO₂/GO nanofibrous membrane is eco-friendly, reusable, and has great potential for the removal of dyes from industrial wastewaters.     

Drying characteristics and quality attributes of apple slices dried by a non-thermal ultrasonic contact drying method

Drying is one of the most prevalent methods to reduce water activity and preserve foods. However, it is also the most energy-intensive food processing unit operation. Although a number of drying methods have been proposed and tested for the purpose of achieving a time- and energy-efficient drying process, almost all current drying methods still rely on thermal energy to remove moisture from the product. In this study, a novel use of power ultrasound was explored for drying of apple slices without the application of heat. The non-thermal ultrasound contact drying (US-CD) was performed in the presence of an air stream (26–40 °C) flowing over product surface to remove mist or vapor produced by the ultrasound treatment. The effects of the non-thermal US-CD, hot-air drying (HAD), and freeze drying (FD) on the changes in rehydration ratio, pH, titratable acidity, water activity, color, glass transition temperature, texture, antioxidant capacity, total phenols, and microstructures of the samples were evaluated. The moisture content of the apple slices reached below 5% (w.b.) after 75–80 min of US-CD, which was about 45% less than that of the HAD method. The antioxidant capacity and total phenol contents of the US-CD samples were significantly higher than that of the AD samples. The non-thermal ultrasonic contact drying is a promising method which has the potential to significantly reduce drying time and improve product quality.     

High-speed imaging of ultrasonic emulsification using a water-gallium system

Aiming at elucidating ultrasonic emulsification mechanisms, the interaction between a single or multiple acoustic cavitation bubbles and gallium droplet interface was investigated using an high-speed imaging technique. To our best knowledge, the moment of emulsification and formation of fine droplets during ultrasound irradiation were observed for the first time. It was found that the detachment of fine gallium droplets occurs from the water-gallium interface during collapse of big cavitation bubbles. The results suggest that the maximum size of cavitation bubble before collapsing is of prime importance for emulsification phenomena. Previous numerical simulation revealed that the collapse of big cavitation bubble is followed by generation of high-velocity liquid jet directed toward the water-gallium interface. Such a jet is assumed to be the prime cause of liquid emulsification. The distance between cavitation bubbles and water-gallium interface was found to slightly affect the emulsification onset. The droplet fragmentation conditions are also discussed in terms of the balance between (1) interfacial and kinetic energies and (2) dynamic and Laplace pressure during droplet formation.